C121. Zhou, K., Zhang, Y., and Tang, J., “Order-reduced modeling-based multi-level damage identification using piezoelectric impedance measurement,” Proceedings of The 16th International Conference on Motion and Vibration Control, 2022.
C120. Zhou, K., and Tang, J., “Probabilistic gear fault diagnosis using Bayesian convolutional neural network,” Proceedings of the 2nd Modeling, Estimation and Control Conference MECC 2022, IFAC-PapersOnLine, V55(37), pp 795-799, 2022.
C119. Wang, T., and Tang, J., “Parametric analysis of negative capacitance circuit for enhanced vibration suppression through piezoelectric shunt,” Proceedings of ASME IDETC, DETC2022-90616, 2022.
C118. Zhang, Y., Zhou, K., and Tang, J., “Memetic optimizer for structural damage identification using electromechanical admittance,” Proceedings of ASME IDETC, DETC2022-91039, 2022.
C117. Gillespie, E., Javadian, D., and Tang, J., “Pose estimation using augmented reality for parts under robotic repair,” Proceedings of 2022 International Symposium on Flexible Automation, ISFA2022-036.
C116. Javadian, D., Gillespie, E., and Tang, J., “Using robot automated laser profile sensing for part defect inspection in cold spray repair,” Proceedings of 2022 International Symposium on Flexible Automation, ISFA2022-001.
C115. Dupont, J., Wang, T., and Tang, J., “Phase-shift analysis of locally resonant piezoelectric metasurface,” Proceedings of SPIE, Smart Structures / NDE, V12048, 2022.
C114. Wang, T., Dupont, J., and Tang, J., “Enhanced passive vibration suppression using self-powered piezoelectric circuity integration,” Proceedings of SPIE, Smart Structures / NDE, V12043, 2022.
C113. Zhang, Y., Zhou, K., and Tang, J., “Structural damage identification using inverse analysis through optimization with sparsity,” Proceedings of SPIE, Smart Structures / NDE, V12046, 2022.
C112. Zhou, K., and Tang, J., “Physics based multi-fidelity fusion for efficient characterization of mode shape variation under uncertainties,” Proceedings of ASME Dynamic Systems and Control Conference, DSCC2020-3199, 2020.
C111. Zhou, K., and Tang, J., “Fuzzy classification of gear fault using principal component analysis-based fuzzy neural network,” Proceedings of 2020 International Symposium on Flexible Automation, 2020.
C110. Xu, D., Zhou, K., and Tang, J., “The application of MOSA algorithm in Gleeble testing model updating,” Proceedings of 2020 International Symposium on Flexible Automation, 2020.
C109. Zhang, Y., and Tang, J., “Structural damage identification using multi-objective optimization based inverse analysis,” Proceedings of SPIE, Smart Structures / NDE, V11380, 2020.
C108. Zhou, K., Li, R., Chen, W.J., Tang, J., and Zhang, D., “Uncertainty quantification of the dimensional variations of a curved composite flange,” Proceedings of American Society of Composites (ASC) 34th Technical Conference, 2019.
C107. Cao, P., and Tang, J., “Machine learning enabled gearbox fault pattern recognition,” Proceedings of 2018 International Symposium on Flexible Automation, 2018.
C106. Li, S., Xu, J., and Tang, J., “Adaptive elastic metasurfaces for wave front manipulation,” Proceedings of SPIE, Smart Structures / NDE, V10595, 2018.
C105. Xu, J., Li, S., and Tang, J., “Tailoring vibration mode of a uniform beam by acoustic metamaterial synthesis,” Proceedings of SPIE, Smart Structures / NDE, V10595, 2018.
C104. Cao, P., and Tang, J., “Identifying structural damage with data driven impedance response calibration,” Proceedings of SPIE, Smart Structures / NDE, V10600, 2018.
C103. Yuan, Y., Chen, X., and Tang, J., “Periodic wind disturbance rejection using robust individual pitch control,” Proceedings of SPIE, Smart Structures / NDE, V10601, 2018.
C102. Cao, P., Shuai, Q., and Tang, J., “Damage identification using piezoelectric impedance measurement with compressed sensing,” Proceedings of the ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2017-3936, 2017.
C101. Cao, P., Fan, Z., Gao, R., and Tang, J., “A manufacturing oriented single point search hyper-heuristic scheme for multi-objective optimization,” Proceedings of ASME IDETC, DETC2017-68285, 2017.
C100. Cao, P., Yoo, D., and Tang, J., “Structural damage identification with multi-objective DIRECT algorithm using natural frequencies and single mode shape,”Proceedings of SPIE, Smart Structures / NDE, V10170, 2017.
C99. Yoo, D., and Tang, J., “Multi-objective optimization of piezoelectric circuitry network for mode delocalization and suppression of bladed disk,” Proceedings of SPIE, Smart Structures / NDE, V10164, 2017.
C98. Xu, J., Li, S., and Tang, J., “Adaptive GRIN lens based on piezoelectric metamaterial for acoustic beam focusing,” Proceedings of SPIE, Smart Structures / NDE, V10164, 2017.
C97. Yuan, Y., Cao, P., and Tang, J., “Application of model predictive control for optimal operation of wind turbines,” Proceedings of SPIE, Smart Structures / NDE, V10171, 2017.
C96. Li, S., Xu, J., and Tang, J., “Adaptive acoustic metamaterial with periodic piezoelectric network,” Proceedings of SPIE, Smart Structures / NDE, V10164, 2017.
C95. Pan, W., Tang, G., and Tang, J., “Assessment of uncertainty effect in piezoelectric metamaterial,” Proceedings of SPIE, Smart Structures / NDE, V10165, 2017.
C94. Yuan, Y., Chen, X., and Tang, J., “Disturbance observer based control design for wind turbine speed regulation,” Proceedings of ASME Dynamic Systems and Control Conference, DSCC2016-9873, 2016.
C93. Yoo, D., and Tang, J., “Vibration-based structural damage identification under interval uncertainty,” Proceedings of ASME Dynamic Systems and Control Conference, DSCC2016-9874, 2016.
C92. Xu, J., Li, S., and Tang, J., “Parametric analysis of piezoelectric metamaterial with LC shunt circuit,” Proceedings of the ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2016-9153, 2016.
C91. Li, S., and Tang, J., “On vibration suppression and energy dissipation using tuned mass particle damper,” Proceedings of ASME IDETC, IDETC2016-60561, 2016.
C90. Cao, P., Fan, Z., Gao, R., and Tang, J., “Complex housing: modelling and optimization using an improved multi-objective simulated annealing algorithm,” Proceedings of ASME IDETC, IDETC2016-60563, 2016.
C89. Cao, P., Fan, Z., Gao, R., and Tang, J., “A framework of fast any-angle path finding algorithm on visibility graphs based on A for plumbing design,” Proceedings of 2016 International Symposium on Flexible Automation, 2016.
C88. Zhou, K., Liang, G., and Tang, J., “Vibration analysis of structure with uncertainty using two-level Gaussian processes and Bayesian inference,” Proceedings of MoVic2016, 2016.
C87. Xu, J., and Tang, J., “Acoustic prism for continuous beam steering based on piezo-electric metamaterial,” Proceedings of SPIE, Smart Structures / NDE, V9799, 2016.
C86. Shuai, Q., Liang, G., and Tang, J., “Piezoelectric admittance-based damage identification by Bayesian inference with pre-screening,” Proceedings of SPIE, Smart Structures / NDE, V9799, 2016.
C85. Yuan, Y., Chen, X., and Tang, J., “Disturbance observer based pitch control of wind turbines for disturbance rejection,” Proceedings of SPIE, Smart Structures / NDE, V9806, 2016.
C84. Zhang, S., and Tang, J., “Gearbox fault diagnosis based on time-frequency domain synchronous averaging and feature extraction technique,” Proceedings of SPIE, Smart Structures / NDE, V9804, 2016.
C83. Wang, H., and Tang, J., “Electromagnetic energy harvesting from a dual-mass two-frequency pendulum oscillator,” Proceedings of SPIE, Smart Structures / NDE, V9799, 2016.
C82. Zhang, S., and Tang, J., “Dynamic modeling of torsional impact and its stiffness measurement for impact wrench,” Proceedings of ASME Dynamic Systems and Control Conference, DSCC2015-10000, 2015.
C81. Zhou, K., Cao, P., and Tang, J., “Efficient uncertainty quantification in structural dynamic analysis using two-level Gaussian processes,” Proceedings of ASME IDETC, DETC2015-47724.
C80. Li, S., and Tang, J., “Analysis and optimal placement of particle dampers based on discrete element simulation,” Proceedings of ASME IDETC, DETC2015-47700.
C79. Cao, P., Fan, Z., Gao, R., and Tang, J., “A multi-objective simulated annealing approach towards 3D packing problems with strong constraints: CMOSA,” Proceedings of ASME IDETC, DETC2015-47670.
C78. Yoo, D., and Tang, J., “Optimal design of intentional mistuning for a bladed disk with interval uncertainty,” Proceedings of ASME IDETC, DETC2015-47690.
C77. Ding, Y., Tang, J., and Huang, J.Z., “Data analytics methods for wind energy applications,” Proceedings of ASME Turbo Expo, GT2015-43286, 2015.
C76. Shuai, Q., Zhou, K., and Tang, J., “Structural damage identification using piezoelectric impedance and Bayesian inference,” Proceedings of SPIE, Smart Structures / NDE, V9435, 2015.
C75. Yuan, Y., and Tang, J., “Adaptive pitch control for load mitigation of wind turbines,” Proceedings of SPIE, Smart Structures / NDE, V9435, 2015.
C74. Xu, J., and Tang, J., “Piezoelectric cantilever-pendulum for multi-directional energy harvesting with internal resonance,” Proceedings of SPIE, Smart Structures / NDE, V9431, 2015.
C73. Zhou, K., Shuai, Q., and Tang, J., “Adaptive damage detection using tunable piezoelectric admittance sensor and intelligent inference,” Proceedings of the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2014-7624, 2014.
C72. Cao, P., Fan, Z., Gao, R., and Tang, J., “Optimal configuration of valves and plumbing lines in complex housing,” Proceedings of ASME IDETC, DETC2014-35259, 2014.
C71. Zhou, K., and Tang, J., “Robust optimization towards reducing response variation by efficient NURBS finite element inverse analysis,” Proceedings of MoVic2014, The 12th International Conference on Motion and Vibration Control, 2014.
C70. Xu, J., and Tang, J., “Improved piezoelectric energy harvesting with magnetically enhanced electro-mechanical coupling,” Proceedings of MoVic2014, The 12th International Conference on Motion and Vibration Control, 2014.
C69. Zhang, S., Tang, J., and Ding, Y., “Modeling and analysis of time-periodic gearbox vibration,” Proceedings of ASME Turbo Expo, GT2014-27230, 2014.
C68. Zhou, K., Liang, G., and Tang, J., “Efficient model updating using Bayesian probabilistic framework based on measured vibratory response,” Proceedings of SPIE, Smart Structures / NDE, V9063, 2014.
C67. Cremins, M., Shuai, Q., and Xu, J., and Tang, J., “Fault detection in railway track using piezoelectric impedance,” Proceedings of SPIE, Smart Structures / NDE, V9061, 2014.
C66. Li, J., Jang, S., and Tang, J., “Implementation of a piezoelectric energy harvester in railway health monitoring,” Proceedings of SPIE, Smart Structures / NDE, V9061, 2014.
C65. Xu, J., and Tang, J., “Inducing nonlinear dynamic response via piezoelectric circuitry integration,” Proceedings of SPIE, Smart Structures / NDE, V9067, 2014.
C64. Shuai, Q., and Tang, J., “Lift-off effect compensation for magnetic impedance-based damage detection,” Proceedings of SPIE, Smart Structures / NDE, V9061, 2014.
C63. Zhou, K., and Tang, J., “Perturbing structural design towards minimizing variation in vibratory response,” Proceedings of ASME Dynamic Systems and Control Conference, DSCC2013-4006, 2013.
C62. Cooper, J., Cao, C., and Tang, J., “Control of a nonlinear pressure-regulating engine bleed valve in aircraft air management systems,” Proceedings of ASME Dynamic Systems and Control Conference, DSCC2013-4011, 2013.
C61. Zhou, K., and Tang, J., “Design modification of cyclically periodic structure using Gaussian process,” Proceedings of SPIE, Smart Structures / NDE, V8694, 2013.
C60. Xu, J., and Tang, J., “Enhance piezoelectric energy harvesting by stiffness compensation using Magnetic effect,” Proceedings of SPIE, Smart Structures / NDE, V8688, 2013.
C59. Shuai, Q., and Tang, J., “Improved modeling of magnetic impedance sensing system for damage detection,” Proceedings of SPIE, Smart Structures / NDE, V8692, 2013.
C58. Li, J., Jang, S., and Tang, J., “Optimization of Piezoelectric energy harvester for wireless smart sensors in railway health monitoring,” Proceedings of SPIE, Smart Structures / NDE, V8692, 2013.
C57. Zhou, K., and Tang, J., “Towards alleviating vibration response variation based on reduced order modeling and analysis,” Proceedings of ASME Dynamic Systems and Control Conference, DSCCMOVIC2012-8841, 2012.
C56. Diehl, E., Tang, J., and DeSmidt, H., “Gear fault modeling and vibration response analysis,” Proceedings of ASME Dynamic Systems and Control Conference, DSCCMOVIC2012-8842, 2012.
C55. Zhou, K., Tang, J., and Christenson, R., “Rapid identification of structural properties based on mass response method,” Proceedings of SPIE, Smart Structures / NDE, V8347, 2012.
C54. Li, J., Jang, S., and Tang, J., “Modeling and analysis of a bimorph piezoelectric energy harvester for railway bridge health monitoring,” Proceedings of SPIE, Smart Structures / NDE, V8348, 2012.
C53. Xia, Z., and Tang, J., “Uncertainty analysis of structural dynamics by using two-level Gaussian processes,” Proceedings of ASME IMECE, IMECE2011-63708, 2011.
C52. Xia, Z., and Tang, J., “Characterization of structural dynamics with uncertainty by using Gaussian processes,” Proceedings of ASME IDETC, DETC2011-48804, 2011.
C51. Lu, Y., Tang, J., and Luo, H., “Wind turbine gearbox fault detection using multiple sensors with features level data fusion,” Proceedings of ASME Turbo Expo, GT2011-46538, 2011.
C50. Lu, Y., and Tang, J., “Wind turbine gearbox health monitoring using time-frequency features from multiple sensors,” Proceedings of SPIE, Smart Structures / NDE, V7981, 2011.
C49. Zhao, J., Wang, X., and Tang, J., “Damping reduction in structures using piezoelectric circuitry with negative resistance,” Proceedings of ASME IDETC, DETC2010-29204, 2010.
C48. Lew, J., Juang, J., and Tang, J., “Damage identification of a structure with significant subsystem variability,” 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA-2010-2800.
C47. Lu, Y., and Tang, J., “An electro-mechanical periodic system with piezoelectric transducers and coupled circuitry: dynamic analysis and applications,” Proceedings of SPIE, Smart Structures / NDE, V7643, 2010.
C46. Zhao, J., and Tang, J., “Anomaly amplification in dynamic response of damaged periodic structures using piezoelectric networking,” Proceedings of SPIE, Smart Structures / NDE, V7643, 2010.
C45. Wang, X., and Tang, J., “Damage detection using magnetic impedance approach with circuitry integration: sensor optimization,” Proceedings of SPIE, Smart Structures / NDE, V7647, 2010.
C44. Wang, X., and Tang, J., “Non-contact structural damage detection using magnetic admittance approach with circuitry tuning,” Proceedings of SPIE, Smart Structures / NDE, V7648, 2010.
C43. Xia, Z., and Tang, J., “Efficient order reduction in vibration analysis of periodic structures with uncertainties,” Proceedings of SPIE, Smart Structures / NDE, V7649, 2010.
C42. Wang, X., and Tang, J., “Enhanced piezoelectric impedance approach for damage detection with circuitry integration,” Proceedings of the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2009-1412, 2009.
C41. Wang, X., and Tang, J., “Damage detection using impedance measurement with magnetic transducer,” Proceedings of the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2009-1414, 2009.
C40. Wang, X., and Tang, J., “Damage detection using piezoelectric impedance approach with inductive circuitry,” Proceedings of SPIE, Smart Structures / NDE, V7292, 2009.
C39. Zhao, J., Wang, X., and Tang, J., “Changing dynamic behavior of periodic structures by using piezoelectric circuitry with negative resistance,” Proceedings of SPIE, Smart Structures / NDE, V7288, 2009.
C38. Lu, Y., and Tang, J., “Prototyping a wireless sensing platform for acoustic emission signals collected by microphone arrays,” Proceedings of SPIE, Smart Structures / NDE, V7292, 2009.
C37. Dong, W., and Tang, J., “Precision tracking control of dual-stage actuation system for optical manufacturing,” Proceedings of SPIE, Smart Structures / NDE, V7288, 2009.
C36. Zhao, J., and Tang, J., “Enhanced statistical damage identification using frequency shift information with tunable piezoelectric circuitry,” Proceedings of SPIE, Smart Structures / NDE, V6932, 2008.
C35. Wang, X., and Tang, J., “Damage identification using piezoelectric impedance and spectral element method,” Proceedings of SPIE, Smart Structures / NDE, V6932, 2008.
C34. Dong, W., Tang, J., and ElDeeb, Y., “Design of dual-stage actuation system for high precision optical manufacturing,” Proceedings of SPIE, Smart Structures / NDE, V6928, 2008.
C33. Wang, X., Lu, Y., and Tang, J., “Parametric analysis of damage detection using piezoelectric transducer and Lamb wave approach,” Proceedings of ASME IMECE, Design Engineering, DE-42010, 2007.
C32. Cho, J.J., Ding, Y., Chen, Y., and Tang, J., “Robust calibration for localization in clustered wireless sensor networks,” Proceedings of IEEE Conference on Automation Science and Engineering (CASE2007).
C31. Fang, X., Luo, H., and Tang, J., “Investigation of granular damping in transient vibrations using Hilbert transform based technique,” Proceedings of ASME IDETC, 21st Biennial Conference on Mechanical Vibration and Noise, DETC2007-34900, 2007.
C30. Jiang, L., Wang, K.W., and Tang, J., “A sensitivity enhancing control approach for structural model updating,” Proceedings of ASME IDETC, 21st Biennial Conference on Mechanical Vibration and Noise, DETC2007-34399, 2007.
C29. Luo, H., Fang, X., Hallman, D., and Tang, J., “Characterization of granular damper using Hilbert transform and free vibration response,” Proceedings of 48th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA-2007-2048, 2007.
C28. Ding, Y., Byon, E., Park, C., Tang, J., Lu, Y., and Wang, X., “Dynamic data-driven fault diagnosis of wind turbine systems,” Proceedings of International Conference on Computational Science, Part I, LNCS 4487, pp 1197-1204, 2007.
C27. Lu, Y., Wang, X., and Tang, J., “Robust decision making in damage detection using piezoelectric transducers and Lamb wave propagation,” Proceedings of SPIE, Smart Structures / NDE, V6529, 2007.
C26. Xue, X., and Tang, J., “Vibration control of nonlinear rotating beam using piezoelectric actuator and sliding mode approach,” Proceedings of ASME IMECE, Design Engineering, DE-14434, 2006.
C25. Xue, X. and Tang, J., “A robust nonlinear tracking control approach for multi-body flexible dynamic systems,” Proceedings of ASME IMECE, Dynamic Systems & Control, DSC-14437, 2006.
C24. Fang, X., and Tang, J., “Analysis of segregation phenomenon in granular motion,” Proceedings of ASME IMECE, Design Engineering, DE-14443, 2006.
C23. Fang, X., and Tang, J., “Granular damping analysis using a direct simulation Monte Carlo approach,” Proceedings of ASME IMECE, Applied Mechanics, AMD-14448, 2006.
C22. Jiang, L.J., Tang, J., and Wang, K.W., “Tuning criterion of variable piezoelectric circuitry for frequency-shift-based damage identification enhancement,” Proceedings of ASME IMECE, Aerospace, AD-14737, 2006.
C21. Jiang, L.J., Tang, J., and Wang, K.W., “Structural damage detection using sensitivity enhancing feedback control through eigenstructure assignment,” Proceedings of SPIE, Smart Structures / NDE, V6174, pp690-706, 2006.
C20. Fang, X., and Tang, J., “A highly efficient discrete element approach for granular damping analysis,” Proceedings of SPIE, Smart Structures / NDE, V6169, pp205-214, 2006.
C19. Fang, X., and Tang, J., “Damage detection of engine bladed-disks using multivariate statistical analysis,” Proceedings of SPIE, Smart Structures / NDE, V6174, pp707-714, 2006.
C18. Xue, X., and Tang, J., “High precision tracking control using piezoelectric actuator network,” Proceedings of ASME IMECE, Design Engineering, DE-81151, 2005.
C17. Xue, X., and Tang, J., “Condition monitoring of PEM fuel cell using Hotelling T2 control limit,” Proceedings of ASME IMECE, Advanced Energy Systems, AES-81160, 2005.
C16. Tang, J., “Frequency response based damage detection using principal component analysis,” Proceedings of IEEE International Conference on Information Acquisition, pp407-412, 2005.
C15. Jiang, L.J., Tang, J., and Wang, K.W., “An iterative eigenvector updating method for structural damage detection using piezoelectric transducer circuitry with tunable inductance,” Proceedings of 46th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA-2005-2189, 2005.
C14. Fang, X., and Tang, J., “Damage detection by statistical analysis of vibration signature,” Proceedings of SPIE, Smart Structures / NDE, V5765, pp802-810, 2005.
C13. Jiang, L.J., Tang, J., and Wang, K.W., “An improved damage identification method using tunable piezoelectric transducer circuit,” Proceedings of SPIE, Smart Structures / NDE, V5765, pp19-29, 2005.
C12. Fang, X., and Tang, J., “Learning rate effect in neural network for damage detection,” Proceedings of ASME IMECE, Dynamic Systems & Control, DSC-60238, 2004.
C11. Fang, X., and Tang, J., “Analysis of crack induced vibration localization in simplified bladed-disk structures,” Proceedings of ASME IMECE, Design Engineering, DE-60239, 2004.
C10. Tang, J., and Ding, Y., “A frequency response based damage detection approach using shunted piezoelectric transducer with variable inductance,” Proceedings of SPIE, Smart Structures / NDE, V5391, pp441-448, 2004.
C9. Tang, J., and Wang, K.W., “A simultaneous active-passive approach for structural vibration confinement using piezoelectric actuators,” Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA-2003-1721, 2003.
C8. Tang, J., and Wang, K.W., “Vibration de-localization of nearly periodic structures using coupled piezoelectric networks,” Proceedings of ASME IMECE, Aerospace, AD-23704, 2001.
C7. Tang, J., and Wang, K.W., “Vibration confinement via optimal eigenvector assignment and piezoelectric networks,” Proceedings of ASME Design Engineering Technical Conference, DETC2001/VIB-21474, 2001.
C6. Morgan, R.A., Wang, K.W., and Tang, J., “Active tuning and coupling enhancement of piezoelectric vibration absorbers for variable-frequency harmonic excitations in multiple degrees of freedom mechanical systems,” Proceedings of SPIE, Smart Materials and Structure, V3985, pp497-508, 2000.
C5. Tang, J., and Wang, K.W., “Vibration control using piezoelectric materials with high order nonlinearity,” Proceedings of ASME IMECE, Adaptive Structures and Material Systems, AD89, pp149-160, 1999.
C4. Tang, J., Wang, K.W., and Philen, M., “Robust sliding mode control using active piezoelectric actuator with passive shunt,” Proceedings of SPIE, Smart Materials and Structure, V3668, pp543-554, 1999.
C3. Tang, J., and Wang, K.W., “Vibration control of rotationally periodic structures using passive piezoelectric shunt networks and active tuning,” Proceedings of ASME IMECE, Active Control of Vibration and Noise, DE-Vol.97/DSC-Vol.65, pp39-49, 1998.
C2. Zhang, W., Wang, W.-L., Wang, H., and Tang, J., “A finite element approach to the analysis of rotating bladed-disk assemblies coupled with flexible shaft,” ASME paper 94-GT-107, 1994.
C1. Zhang, W., Wang, W.-L., Wang, H., and Tang, J., “Analytical and experimental investigation of bladed-disk / shaft coupled system,” Proceedings of IFToMM 4th International Conference on Rotordynamics, pp63-68, 1994.